Results 41 to 60 of 136
Thread: 4000 Gallon Pond
-
28-04-2013, 09:35 PM #41
-
03-05-2013, 07:41 PM #42
-
03-05-2013, 07:49 PM #43
-
03-05-2013, 08:58 PM #44
Here is the temporary shelter I put up over the pond ready for glassing
-
03-05-2013, 09:05 PM #45
Matt's first job was to fit PU foam to all the inner walls and to the base of the pond.
-
03-05-2013, 09:51 PM #46
Glassing nearly done...
-
03-05-2013, 09:54 PM #47
All done...Really pleased with Matt's work, would recommend him to anyone...
-
03-05-2013, 10:54 PM #48
-
03-05-2013, 11:01 PM #49
-
03-05-2013, 11:10 PM #50
-
04-05-2013, 08:00 AM #511630 Gallon raised pond
4" 'Avenue' bottom drain
Estro sieve
Econobead EB60 bead filter
Sequence 18000 pump, 6000 pump on skimmer line
Elecro 2kW in-line heater
Evolution Aqua 70 air pump
Standard wall skimmer
Hozelock Vorton 55watt UV
and some nice koi
-
04-05-2013, 01:05 PM #52
Thanks Miles, hopefully all will be ok...
-
04-05-2013, 01:16 PM #53
Started to layout pipework for drum today...The plan is for the pipework to come under the floor and feed into the drum, I am trying to do it in a way so that there is a minimal amount of bends...
Feeding into the drum I've got two 4" bottom drains and one 3" skimmer, from there into the flow-friend then over a set of double bakki showers. The pipe feeding over the shower will be 3" pressure pipe and will have machined slots at 45º angles to each other..
The pipework for the waste shute, will be plumbed in 4" pipe.
-
04-05-2013, 03:06 PM #54
Hi Gavin,
Looking good mate its all coming together now when are you looking to fill it ?
-
04-05-2013, 06:49 PM #55
Looking really good Gavin.
This is exactly what I'd be doing if I was starting again (and I could afford it)
-
04-05-2013, 07:08 PM #56
Can you post any smaller pictures?
There's gonna be a serious clash of colours Gavin.
What are the levels like vertically? Get that hosepipe out..
Dave
-
04-05-2013, 07:35 PM #57
-
04-05-2013, 08:24 PM #58
Pics are good but larger pics are better! I will offer to paint the drum red for you, just to add a splash of colour.
-
04-05-2013, 09:04 PM #59
Dave
My Plan is working I'm trying to use camo techniques to disguise the drum from the missus..
Will get the hosepipe on it on Monday, but the laser indicates I'm about 10" out.
Will be getting the kango out first and digging up some of the concrete to route the pipes into the drum..
Gav
-
04-05-2013, 09:17 PM #60
Similar Threads
-
The complete build start to finish
By 0765peter in forum Pond Construction and Pond Build DiariesReplies: 31Last Post: 27-03-2014, 10:15 AM -
Kanundra
By TUTTY in forum General Koi Carp ChatReplies: 11Last Post: 12-03-2014, 09:05 PM -
multibay,vortex+bits for showa
By denz1979 in forum Koi and Pond Equipment Swap / TradeReplies: 0Last Post: 22-01-2014, 11:04 PM -
Geeze!!!
By Kanundra in forum General Koi Carp ChatReplies: 1Last Post: 17-08-2013, 04:02 PM -
Blanket Weed???
By llewes in forum General Koi Carp ChatReplies: 2Last Post: 16-07-2013, 08:02 AM
The Daily pond temp thread
Still at around 17C, know what you mean about getting the covers off though :D it will be really...